| Operation | Description |
|---|
| * | This covers all the remaining entries not already specified. If you leave the line blank for the operation then the WT is dropped. Remember you always have to have an option for * in your PCR. |
| ADDCU | Cumulates the wage type into the relevant cumulation (/101...) and valuation(/201...) wage types |
| ADDNA * | From the IT, Number and Amt are cumulated into the OT. Blank is OT whilst E refers to the RT. |
| ADDNA 4067 | Current Num and Amt are added in to wage type 4067. |
| ADDWSE9N03 | This operation is very similar to ADDWT. The only difference is that it writes the value to table V0 as well |
| ADDWSI* | Store the current wage type in the IT. |
| ADDWT * | Store wage type in IT/OT |
| ADDWT 1103 | All the current values for amt, num and rte are added to the values that are currently held in wt 1103 |
| ADDWT&T | Adds the current wage type to the variable table as T - which can be used at a later stage |
| ADDWTA* | The values in the wage type are copied to the previous employer table VAG - called in the rules XDPI, XDPR & XDPT |
| ADDWTC* | The values in the current wage type are added into the CRT |
| ADDWTC/101 | The values in the current wage type are added into the CRT for the technical wage type /101 |
| ADDWTD* | The values in the current wage type are added into the Difference table DT |
| ADDWTD/551 | The values in the current wage type are added into the difference table DT for the technical wage type /551 |
| ADDWTD/APO | Add the current wage type to the difference table (DT) |
| ADDWTE | Store amount in Results Table (RT) - difference with line below |
| ADDWTE* | Add the current wage type to the results table RT |
| ADDWTE/101 | Add the current wage type to the results table as /101 |
| ADDWTH/201 | Add the current wage type to the old results table (ORT) as wage type /201 |
| ADDWTI* | Add the current wage type to the input table IT |
| ADDWTI/101 | The values in the current wage type are added into the input table IT for the technical wage type /101 |
| ADDWTL* | Add the current wage type to the results table last payroll (LRT) |
| ADDWTN | Used in XLON |
| ADDWTN/LRP | (Loans - XLON) |
| ADDWTW | Add the current wage type to the wage maintenance table |
| AMT- 9023 | Subtract amount field from wage type 9023 from Table IT (if wage type 9023 is available.) |
| AMT%33.33 | Multiply the amount by 33.33% |
| AMT%KSAPRO | Multiply the amount by the value SAPRO held in table T511k |
| AMT-& T | Amount minus the value held in variable T |
| AMT*-1 | Amount multiplied by negative 1 |
| AMT*12 | Multiply amount by 12 |
| AMT*KGENAU | Multiply the amount by the constant GENAU held in table T511k. GENAU is used to factor up by 4 or 5 factors of 10 to avoid the issue of errors caused by rounding. |
| AMT-.04 | Subtract 0.4 from the amount field |
| AMT/2 | Divide the amount by 2 |
| AMT/KGENAU | Divide the amount by the factor GENAU held in the constants table T511k |
| AMT/KPKWPR | Amount divided by the constant PKWRP held in table T511K |
| AMT/KZF001 | Amount is divided by constant ZF001 from table T511K |
| AMT? * | Compare the value held in the amount field for all wage types |
| AMT? /GPY | Compare the value held in the amount field for wage type /GPY |
| AMT?& ZAPR | Compare the value held in the amount field against the constant ZAPR |
| AMT?0 | Compare the value held in the amount field against 0 |
| AMT?E /167 | Compare the amount against the value of the amount held in the results table RT for wage type /167 |
| AMT?IGRUEB | Compare the current amount against the limit held for the bank transfer |
| AMT+ /564 | Add the amount from wage type /564 from the IT |
| AMT+ 0001 | Add amount field from wage type 0001 from Table IT (if wage type 0001 is available.) |
| AMT+ 9013 | Add amount field from wage type 9013 from Table IT (if wage type 9013 is available.) |
| AMT+& ZSAP | Add the value held in the variable ZSAP to the amount for the current wage type being processed |
| AMT+E 910B | Add the current amount to the RT and place in wage type 910B |
| AMT+O /ZPO | Add Amt from wage type /ZPO into VORT (Summarised ORT) |
| AMT< /562 | Checks whether the currently held amount is less that that held in the wage type /562 |
| AMT= * | This sets the amount = zero for the wage type in question |
| AMT= /111 | Store the value in the amount field of wage type /111 in the amount field of wage type 2110 |
| AMT= 1000 | Store the value in the amount field of wage type 1000 in the amount field of wage type 2110 |
| AMT= BETRG | Let the amount equal the value held in the BETRG (amount) field for the wage type in question |
| AMT= PKWWR | Reset the amount on wage type xxxx to that held in the value for KWWR held in T511K |
| AMT= PLANS | Sets the amount = position number |
| AMT=& /426 | Set the amt = amt held on technical WT /426 |
| AMT=& TASA | Reset the amount on wage type xxxx to that held in the temporary wage type TASA |
| AMT=0 | Let the amount equal zero |
| AMT=A * | The amount is set to the value held in the table VAG - previous employee data |
| AMT=E * | Lets the Amt = the Amt held for the current wage type in the RT |
| AMT=E /167 | Lets the Amt = the Amt held for technical wage type /167 in the RT |
| AMT=KSAPLR | Set the amount = the value SAPLR held in table T511k |
| AMT=L * | Lets the Amt = the Amt held for the current wage type in the LRT - last result table |
| AMT=L /561 | Lets the Amt = the Amt held for the wage type /561 in the LRT - last result table |
| AMT=N /LBB | Add the amount value in technical loan wage type /LBB (loan balance) to specific loan balance wage type |
| AMT=N /LOP | Add the amount value in technical loan wage type /LOP (loan payment) to specific loan payment wage type |
| AMT=N /LRP | Add the amount value in technical loan wage type /LRP (loan repayment) to specific loan repayment wage type |
| AMT=Q /GPY | Lets the Amt = the Amt held for the wage type /561 in the OCRT - old cumulative result table |
| AMT=ZERO | Reduce the value in the amount field to zero |
| AMT>* | "Maximum formation: The greater value of * and the current value of the AMT field is determined and written to the current AMT field." |
| AMT-1 | Multiply the amount by -1 - I think this should be subtract 1 from the amt |
| AMT50 | If the amount field value is smaller than 50, it is retained. Otherwise it is set at 50 (forming a minimum amount). |
| AMT-E /167 | Subtract the Amt value held in the RT for /167 from the currently stored amount |
| AMT-K43301 | Take the value held against payroll constant 43301 from the annual salary |
| AMT-O /167 | Subtract the Amt value held in the ORT for /167 from the currently stored amount |
| AMT-R 9019 | Amt for the current wage type less the value held in the RT for 9019 (Results wage types using exact splits) |
| AMTS /564 | Subtraction to zero - the value cannot be less than zero. |
| AMTS* | Subtraction to 0 (not negative) for the current wage type |
| AMTS* 9013 | Subtraction to 0 (not negative). Current wage type less 9013 |
| AMTSE 9043 | Subtraction to 0 (not negative). Current wage type less Amt held in the RT for wage type 9043 |
| BTREC /558 | "Sets the recipient data for bank transfers. Can only be run after bank transfer data has been read from an infotype. Data on wage type and amount are transferred from the current fields (OT) and retained in the transfer table together with data on the recipient of the record last read." |
| CMPER 0510 | Compares the current amount with that held for period 10 in year 05. |
| D | Expect a decision in this line |
| D AMT?0 | The amount field value is compared with 0, and the result (‘>’, ‘=’ or ‘<’) is placed in the variable key. |
| D VWTCL 01 | Make a decision on processing class 01 |
| DIVID ANR | Divide the amount by the number and store the result in the rate field |
| DIVID ARA | Divide the value in amount field by the value in the rate field and put the result in the amount field |
| DIVID ARR | Divide the amount by the rate and store the answer in the rate for the wagetype |
| DIVID NRN | Divide the number by the rate and store the answer in the number field |
| ELIMI * | Eliminate all splits |
| ELIMI A | Eliminate splits - work center period (WPBP) |
| ELIMI K | Eliminate splits - cost accounting |
| ELIMI KTX | Eliminate the splits for cost accounting, alternative payments and variable assignment |
| ELIMI R | Eliminate splits - employee sub-group grouping for PCRs |
| ELIMI T | Eliminate splits - alternative payments (ALP) |
| ELIMI U | Eliminate splits - bank transfer (BT) |
| ELIMI X | Eliminate splits - variable assignment |
| ELIMI Y | Eliminate splits - absence assignment |
| ELIMI Z | Eliminate splits - time unit |
| ERROR | Processing terminates for the current employee |
| FILLF A | Restore the original values for the amount - i.e. The values that were held for the amount field in the WT before any processing in this rule |
| FILLF N | Restore the original values for the number - i.e. The values that were held for the number field in the WT before any processing in this rule |
| FILLF NRA | Restore the original values for the number, rate and amount - i.e. The values that were held for the number, rate and amount fields in the WT before any processing in this rule |
| FILLF R | Restore the original values for the rate - i.e. The values that were held in the WT before any processing in this rule |
| GBVRT | "GB specific processing of AWE operation GB specific operation to overwrite the average RATE of wage type /MAE in table RT in case of a retro calculation." |
| GCY ZUM2 | Call PCR ZUM2 |
| GCYGXALQ | Calls PCR XALQ for all wage types - sets wage type to **** |
| GEWRT | Elimination of WPBP split in the RT |
| GSXP2 | New Changes Across End of Year solution active for GBSXP phase 2 |
| GSXPD | Check on Implementation Date of AVERA for SxP AWE. Called in GG70 and ensures that the old and new technical wage types for averages don't both exist. |
| LRTST Y | Evaluates the status of the LRT table. Processing is only continued if the previous month falls in the current year. |
| MEANV 01 | Calculation of averages for 01 (from table T511A) |
| MEANVG03 | Calcualation of averages for 03 (from table T511A) - not sure what the G implies |
| MESSGxxxxx | Can use a 5 character message. Comes up whether the log is turned on or off. Can be used as a customised error message. |
| MODIF 1=02 | Sets the modifier for Wage type generation (T510S) to 02 as the employee grouping |
| MODIF 2=01 | Sets the modifier for Constant valuations (T510J) to 01 as the employee grouping |
| MODIF A=01 | Sets the modifier for the absence valuation rule (T544C) to 01 |
| MULTI ANN | Multiply the amount by the number and store as the number field for the wage type |
| MULTI NRA | Multiply the value in number field by the value in the rate field and put the result in the amount field |
| NEXTR | Process the next line. Placing an * in the last column in the operation column has the same effect as "nextr". Remember to put a letter or number in the next line under the NL column. |
| NEXTR A | Continuation line. A...Z followed by 0...9 Don't forget to put in the letter following the NEXTR in the continuation line of the next line. |
| NEXTR B | Continuation line. A...Z followed by 0...9 Don't forget to put in the letter following the NEXTR in the continuation line of the next line. |
| NUM* BSGRD | Multiply the value in the number field by the value held against the capacity utilization level on infotype 0008 |
| NUM*1.5 | Multiply the value in the number field by 1.5 |
| NUM/100 | Divide the value in the number field by 100 |
| NUM?0 | Test the value in the number field against 0 |
| NUM+ 3710 | Add the value in the number field of wage type 3710 to the number field in the WT being processed |
| NUM+& ZNIL | Adds the number held in the temporary variable ZNIL to the currently held value for the number |
| NUM+39 | Add a value of 39 to the number field |
| NUM+C 3000 | Add to the NUM value from wage type 3000 held in the CRT table - to the NUM value of the WT being processed |
| NUM+E /852 | Adds the number held in technical wage type /852 to the currently held value for the number |
| NUM+TSAP** | Adds the number from the partial period parameter for the paid absence measured in working hours for xx is the sum of all paid absences (totalled over all classes) |
| NUM= 3000 | Set the current NUM to the value held in wage type 3000 |
| NUM= ANZHL | Transfers the value of the ANZHL field to the number field. |
| NUM= BWGRL | Sets the number equal to the valuation basis per hour |
| NUM= EMPCT | NUM = Capacity utilization level from P0007 (called record layout fields in SAP Help) |
| NUM= PLANS | Sets the number equal to the position number of the employee |
| NUM= STDAZ | Sets the number equal to the number of hours taken from IT 0007 |
| NUM=& ZSHF | Sets the number equal to the number held in the temporary variable ZSHF |
| NUM=0 | Set the number field to zero |
| NUM=39 | Store 39 in the number field |
| NUM=BJRSTD | Sets the number equal to the position number of the employee |
| NUM=BTGSTD | Sets the number equal to the daily hours worked by the employee |
| NUM=BWOSTD | Sets the number equal to the weekly hours worked by the employee |
| NUM=E /SSP | Set the NUM = the value of /SSP held in the results table |
| NUM=GSDIVP | Sets the number equal to the working hours for the employee for the entire payroll period |
| NUM=GSSOLL | Set the number = planned working time measured in working hours taken from the work schedule rule |
| NUM=TSAU** | See part period parameter help (function PARTT) |
| NUM=TSAX** | See part period parameter help (function PARTT) |
| NUM=TSDIVI | See part period parameter help (function PARTT) |
| NUM=WOSTD | See part period parameter help (function PARTT) |
| NUM=YCURPP | Set the NUM = current payroll period (?) |
| NUM-51 | Reduce the hours held in the number field by 51 |
| NUM-E /845 | Take away the number for technical wage type /845 held in the RT from the currently held number |
| NUM-TSDIVP | Current value in the number field less the total working time measured in working hours taken from the total working time in payroll accounting period |
| OPIND | Evaluates operation indicator - used immediately after a database record has been read. Multiplies by -1. |
| OUTWPABART | Load Work Center and Basic Pay Data - payroll area |
| OUTWPCTYMO | Load Work Center and Basic Pay Data - country modifier |
| OUTWPPAYSB | Decide which payroll accounting area the employee is in |
| OUTWPPERSB | Load Work Center and Basic Pay Data - employee sub-group |
| OUTWPPERSG | Load Work Center and Basic Pay Data - employee group |
| OUTWPPLANT | Load Work Center and Basic Pay Data - personnel area |
| OUTWPPLTSC | Load Work Center and Basic Pay Data - personnel sub-area |
| OUTWPSHIFT | Load Work Center and Basic Pay Data - shift indicator |
| OUTWPTRFAR | Load Work Center and Basic Pay Data - pay scale type |
| OUTWPWWEEK | Load Work Center and Basic Pay Data - working week from IT 0007 |
| PCY X05D* | Runs PCR X05D for all employee subgroup groupings |
| PCY X93B | Runs PCR X93B |
| PPPAR A | Reads part period parameters: leavers during payroll period |
| PPPAR B | Reads part period parameters: paid absences during payroll period |
| PPPAR E | Reads part period parameters: new joiners during payroll period |
| PPPAR F | Reads part period parameters: leavers on the first day of the next payroll period |
| PPPAR P | Reads part period parameters: if the time unit for the payroll area is different to the time unit for the pay scale type and area |
| PPPAR R | Reads part period parameters: is the employee is in an active work centre? |
| PPPAR S | Reads part period parameters: basic pay changes during payroll period |
| PPPAR U | Reads part period parameters: for unpaid absences in the period |
| PRINT | Prints the IT |
| PRINT& WTG | Prints WTG from the variable table |
| PRINTC | Prints the contents of the CRT |
| PRINTE | Prints the contents of the RT |
| PRINTL | Prints out the contents of the old results table (LRT) |
| PRINTO | Prints the summarised ORT (VORT) |
| R | Employee work centre is inactive, therefore do nothing |
| R51P1?10N | You want to know if there is an entry in table T51P1 with indicator 10 for the current IT wage type. If an entry is found, processing should be continued. |
| R51P1=01R | You want to read the entry in table T51P1 with indicator 01 for the current IT wage type, and store it in the OT table. If an entry is found it should be rejected |
| R51P6A | "Operation R51P6 reads an entry from table T51P6. This table determines the characteristics of the deduction wage types. The value of the arrears characteristic should be placed in the variable key." |
| RE510T | Read Pay Scale Table - group and level |
| RESET * | Sets the splits back up again - has the opposite effect to the ELIMI * operation. |
| RESET 1 | Resets the first national split (/SI) |
| RESET AR | Resets the amount and the rate - is the opposite of ELIMI. Reset * - resets all the split indicators. Give the meaning of all the other variables elsewhere in the document. |
| RESET KR | Resets the cost accounting and employee subgroup grouping values |
| RESET R | Resets R - is the opposite of ELIMI - resets the employee subgroup groupings for the employee |
| RETRO | Checks if the payroll run is a retroactive accounting run |
| ROUND | Rounds off the AMT field - see SAP help for specifics |
| ROUND 005 | Rounds the AMT field up so that it is divisible by 005 |
| ROUND +100 | Rounds the AMT field to the next available number |
| ROUNDA | Rounds off the NUM field - see SAP help for specifics |
| ROUNDB | Rounds off the RTE field - see SAP help for specifics |
| ROUNDG | Rounds off the AMT field - see SAP help for specifics |
| RTE%33.33 | Multiply the value held in the rate by 33.33% - so effectively multiply by .3333 |
| RTE-& HALF | Subtract the value held in the constant HALF from the rate |
| RTE* BSGRD | Multiply the value held in the rate by the capacity utilization level field on infotype 0008 |
| RTE*-1 | Multiply the rate by negative 1 - effectively switch the sign for the value |
| RTE*100 | Multiply percentage held in rate field by 100 |
| RTE*KGENAU | Multiply the rate by the constant GENAU held in table T511k |
| RTE*KGENAU | Multiply the value in the rate field by the payroll constant GENAU (10,000). |
| RTE/100 | Rate divide by 100 |
| RTE/GKDIVI | RTE/ total working time in calendar days |
| RTE/TADIVI | RTE/ total working time in working days |
| RTE/TASOLL | RTE/ planned working time measured in work days |
| RTE/TKDIVI | RTE/ Total working time measured in calendar days |
| RTE/TSDIVI | Divide the value in the rate field by the worked hours for pay period being processed. |
| RTE/TSDIVP | RTE/ total working time measured in working hours |
| RTE?& VLBS | Check to see how the current rate compares against the value held in the temporary variable VLBS |
| RTE?0 | Check to see how the current rate compares against a value of zero |
| RTE+ 1001 | Adds the rate held in wage type 1001 to the currently held rate |
| RTE+& MM | Adds the rate held in the variable MM to the currently held rate |
| RTE+* | Adds the current rate to the IT |
| RTE+100.00 | Adds a value of 100 to the currently held rate |
| RTE+BBETRG | Add the amount from table to the currently held rate |
| RTE+TKAU10 | Add the unpaid absences measured in calendar days for counting class 10 from table T554C |
| RTE= 1001 | Set the rate equal to the value held in the rate field for wage type 1001 |
| RTE= BETRG | Set the rate equal to the amount |
| RTE= BSGRD | Set the rate equal to the capacity utilization level held on infotype 0008 |
| RTE= BWGRL | Sets the rate equal to the valuation basis per hour |
| RTE=& AB | Sets the rate equal to the value held in the temporary variable AB |
| RTE=0 | Set the rate field to zero |
| RTE=10000 | Store 10000 in the rate field of wage type xxxx |
| RTE=BBETRG | Set the rate equal to the amount pulled from the table |
| RTE=BWOSTD | Sets the RTE equal to the weekly hours worked by the employee |
| RTE=GKSOLL | Set the rate as the planned calendar days |
| RTE=K30551 | Store the value held against payroll constant 30551 in table T511 in the rate field of wage type xxxx |
| RTE=KGENAU | RTE set to the value of GENAU from table T511K (default set at 10 000) |
| RTE=TADIVP | RTE = Total working time measured in working days |
| RTE=TASOLL | RTE = planned working time measured in work days |
| RTE=TKDIVI | RTE = Total working time measured in calendar days |
| RTE=TKSOLL | Store the planned calendar days in the rate field of the wage type being processed |
| RTE=TSAU07 | RTE = unpaid absence measured in working hours for counting class 07 |
| RTE=TSDIVP | RTE = total working time measured in working hours |
| RTE=TSSOLL | RTE = planned working time measured in working hours |
| RTE=ZERO | Reduce the value in the amount field to zero |
| RTE-GKAU** | Rate subtract the part period unpaid absences in calendar days for all unpaid absences (totalled over all absence counting classes) |
| RTE-TAAU** | Rate subtract the part period unpaid absences in working days for all unpaid absences (totalled over all absence counting classes) |
| RTE-TKAU** | Take away any unpaid absence, in calendar days, from the current rate (totalled over all absence counting classes) |
| RTE-TKAU20 | Take away any unpaid absence, in calendar days, from the current rate (for absence counting class 20) |
| RTE-TSAU** | Take away any unpaid absence, in worked hours, from the currently held rate (totalled over all absence counting classes) |
| COND=F IF | The condition for function IF is false |
| SCOND=T AL | Set condition for Function LPBEG when the condition is true |
| SCOND=T IF | The condition for function IF is true |
| SCOND=T IF | The condition for function IF is true |
| SETIN A=01 | Set the work center - basic pay split for the wage type as 01 |
| SETIN R=1 | Set the ESG for PCR as 1 |
| SETIN X=NX | You want to set X with number 01 as a variable split; the number of the split is to be increased by 1 by every call. |
| STATU 2P | Status field 2 which is valid at the start of the in-period is entered in the variable key. |
| SUBRC?SET | The return code set in the second example must be evaluated. |
| SUBRC=0 | The internal return code is set to the value 0 |
| SUBWT * | Subtracts the current wage type - effectively changing the sign of the NRA. |
| SUBWT 1025 | Subtracts the current wage type (signs change) and stores it as 1025. |
| SUBWT&ZREG | Subtracts the current wage type and stores it as a temporary variable ZREG. |
| SUBWTD* | Subtracts the current wage type (sign change) of the NRA in the difference table (DT) |
| SUBWTD/551 | Subtracts the current wage type and stores it in the difference table (DT) as a temporary variable ZREG. |
| SUBWTE | Flicks the sign for NRA of the currently processed wage type and stores it in the RT |
| SUBWTE* | Subtracts the current wage type (sign change) of the NRA and stores in the results table (RT) |
| SUBWTE/121 | Flicks the sign for NRA of the currently processed wage type and stores it in the RT as technical wage type /121 |
| SUBWTI* | Flicks the sign for NRA of the currently processed wage type and stores it in the input table (IT) |
| SUBWTI/101 | Flicks the sign for NRA of the currently processed wage type and stores it in the input table (IT) as technical wage type /101 |
| TABLE 503 | Table query on employee groupings / areas |
| TABLE 508A | Table query on shifts / time groups |
| TABLE 510P | Table query on premium table |
| TABLE 512W | Table query on valuation of wage types |
| TABLE 528B | Table query on positions table in PA |
| TABLEALP | Table query on the Alternative Payments table |
| TABLEP0014 | Table query on data held in infotype 0014 - recurring payments and deductions |
| TABLEP0015 | Table query on data held in infotype 0015 - additional payments |
| VAKEYALZNR | Place in the variable key - Y/N alternative payment |
| VAKEYAUFKZ | Place in the variable key - extra pay indicator for overtime |
| VAKEYBNKSA | Place in the variable key - variable keys are held in a certain table |
| VAKEYBNKSA | Place in the variable key - type of bank details P0009 |
| VAKEYLGART | Store in the variable key the wage type |
| VAKEYLNCLS | Place in the variable key - loan type |
| VAKEYLNTPY | Place in the variable key - loan type P0045 |
| VAKEYLNTYP | Place in the variable key - loan type P0045 |
| VAKEYPAYTY | Place in the variable key - payroll type |
| VAKEYPRAKN | Place in the variable key - premium indicator time ITs |
| VAKEYTGRLE | Place in the variable key - variable key is filled out based on the values in the TRFGR and TRFST fields from the current PZ record |
| VAKEYVERSL | Place in the variable key - clearing key for overtime |
| VAKEYZEINH | Place in the variable key - time unit |
| VAKEYZLSCH | Place in the variable key - payment key for bank transfers |
| VALBS? | The system checks to see whether a valuation base exists |
| VALBS?0 | The system checks if a valuation basis is for the current wage type in table T512W. (That the "0" line of view V_T512_B is read). |
| VALBS0 | The current wage type is evaluated with the valuation basis that is entered for the current wage type itself. (That is, the "0" line of view V_512W_B). |
| VALBS0 * | The system multiplies an entry that already exists in the RTE field for the current wage type with the percentage rate from a line 0 of view V_512W and then replaces the wage type names of the current wage type with the name of the wage type from the same line in V_512W. |
| VALBS0 B | Same as VALBS0 * with the exception that the data from infotype 2010 is used. |
| VALBS1 | Replaces the current wage type with the statement wage type that is entered in table T512W for the second wage type derived from the current wage type, and then you want to valuate this using the corresponding valuation basis. |
| VALEN 2 | Sets the length of the variable key to 2 |
| VALEN 3 | Sets the length of the variable key to 3 |
| VAOFF 2 | Variable offset - set here to 2. The system with then ignores the first 2 digits. |
| VARGBINDBW | Place the table field "indicator for indirect valuation" in the variable key |
| VARGBPRAKN | Place the table field "premium number" in the variable key |
| VARGBTRFKZ | Place the table field "ES grouping for collective agreement provision" in the variable key |
| VWTCL 64 | Interrogate processing class 64 |
| WGTYP? | Usually part of a decision - where the wage type is queried |
| WGTYP=* | Passes through the wage type as unchanged |
| WPALL?LAST | Decide if employee has had a pay change in pay period and if the one being processed is the last |
| WPBPC | Operation WPBPC distributes the amount of the current wage type to the active WPBP periods in the payroll period. |
| WPBPCW | This operation splits the amounts but does not distribute them to the different periods |
| Z | Expect to call another PCR in this line |
| ZERO= AN | Sets the AMT and NUM to zero |
| ZERO= RNA | Set the values for the rate, number and amount equal to zero |
| ZERO=& ABCD | Initialises the variable ABCD |
| ZERO=NRA | Sets the NUM RTE and AMT to zero |
Payroll 